Buying a Used 6.0 Power Stroke: Five Checks Before You Buy

Last time, I channelled my inner millennial and talked about my feelings on why you should consider a Ford 6.0 for your next used diesel truck.
This time, we're putting a few tools in the toolbox.

We all know Bob. He's got a nice-looking truck, a confident sales pitch and an explanation for everything. Apparently, she's bulletproofed and she'll last forever.
Great, Bob. Let's have a look.
These are the five checks I use to decide whether a used 6.0 Power Stroke deserves a second look.
We're using Ursula, our 2003 Ford Super Duty King Ranch, to walk through them. They're useful for deciding what needs investigating, what belongs in the price discussion and when to walk away.
There is no reason to pay healthy-truck prices for an unhealthy truck.
Watch the walkthrough
Save the used 6.0 Power Stroke checklist
Save the checklist graphic below to your phone or print it before heading out. Each heading has a short explanation and boxes for the things to check, followed by space for readings and notes.
Tick a box when you've completed the check. Write down the result—even if it's a problem or a test you couldn't finish.

Before you go: bring something that can read the right data
I like having a ScanGauge II along. The factory gauges don't give me the detailed readings I'm looking for.
The four readings I want available are FICM main-power voltage, vehicle voltage, engine oil temperature and engine coolant temperature. FORScan or another compatible scan tool can also be useful, provided it can display the relevant data for that truck.
Confirm that access with the seller beforehand. A small monitor may be an easier conversation than unexpectedly turning up with a laptop and asking to plug into someone's truck.
Ask them to leave the engine cold, and ask whether the block heater has been plugged in.
ScanGauge II: https://link.amazon/B08QpO4B6 (amazon.ca) https://link.amazon/B08IVO3Dk (amazon.com)
As an Amazon Associate I earn from qualifying purchases. Using my affiliate links costs you nothing extra and helps support The Baker Adventures.
1. Start it cold
A truck that's already warm when you arrive hasn't shown you its cold start.
Before starting, look at the oil and coolant readings and ask about any recent running or block-heater use. Those readings add context to the seller's explanation.
Then watch the start itself. How long does it crank? Does it settle into a steady idle? What happens to the smoke and engine behaviour as it warms?
Things to check
Confirm whether the engine was run or pre-warmed before your arrival.
Note block-heater use and the initial oil and coolant readings.
Record crank time, cranking behaviour, idle quality and smoke.
Ask about any starting problem you observe and what has been done about it.
If Bob says, “They all do that,” write down what it actually did.
The useful finding is the behaviour you witnessed. That gives you something concrete to discuss with a shop rather than buying an explanation on the spot.
2. Check FICM voltage
FICM stands for fuel injection control module. Make sure you're watching its main-power output, as well as the truck's separate vehicle-voltage reading.
A stock FICM boosts battery voltage to roughly 48 volts to operate the injectors. A main-power reading below 45 volts needs investigation. Ford's FICM procedure also checks electrical supply before moving through its module diagnosis. [1]
Things to check
Confirm you have selected FICM main power.
Record readings at key-on, during cranking and once running.
Record vehicle voltage separately.
Flag low readings for proper electrical and FICM testing.
A monitor reading is a starting point for diagnosis. It doesn't tell you the final repair bill.
If the truck has an aftermarket higher-voltage FICM, get the details and the specifications for that unit.
3. Compare oil and coolant temperatures
This check needs a properly warmed engine and the appropriate test conditions. Similar temperatures while a cold truck idles won't finish it.
For its oil-cooler road test, Ford specifies coolant above 190°F, approximately 88°C. If oil is 15°F or more hotter than coolant, Ford directs the technician to the oil-cooler service step.
The bulletin includes earlier cooling-system checks and a high-load road test. Follow that sequence; those numbers aren't a ±15°F allowance. [2]
An example of the calculation:
205°F oil − 195°F coolant = a 10°F temperature difference.
Things to check
Record engine oil temperature and engine coolant temperature.
Confirm coolant is above 190°F for Ford's prescribed test.
Record the driving conditions and calculate oil minus coolant.
Arrange follow-up for an excessive gap—or an unfinished test.
In the video, the cold weather and driving conditions meant I couldn't demonstrate a completed temperature test. That's worth recording when you're shopping, too. An unfinished check stays unfinished.
Have a passenger record readings, or use logging. Keep your attention on driving.
4. Drive it + restart it hot
Get a proper drive in, with the seller's permission.
I want to know how it accelerates, whether it pulls smoothly and whether there are noises or exhaust smells I want explained. Record when something happens: cold, warm, under acceleration or after lifting off the throttle.
Then try the hot restart. Once the engine is fully warm, stop safely, shut it down and restart it. If time allows, try another restart after a short heat soak.
Ford identifies hot-only crank/no-start behaviour as a reason to investigate the high-pressure oil system. A leak may become apparent as the oil gets hot and thinner. It can be internal, so you may have no puddle beneath the truck. [3]
Things to check
Note acceleration, hesitation, unusual hissing and smoke.
Note exhaust smells and when they occur.
Observe a restart with the engine fully warm.
Try another after a short heat soak and record any difference.
If it struggles, get the cause established before accepting a cheap-fix promise.
5. Look for coolant loss
Check coolant level with the engine cold. After the drive, look around the degas bottle, cap and nearby surfaces for residue or fresh leakage. Leave the cap closed while the system is hot.
Ursula provides a useful example of why context matters. I had recently changed the thermostat and spilled coolant, leaving residue behind. That explains my spill. When you're looking at someone else's truck, ask for their explanation and look for evidence that supports it.
Overfilling, cap or bottle-neck problems and external leaks deserve attention. Ford's procedure also investigates the EGR cooler and head gaskets; residue alone doesn't settle which repair is needed. [2]
Things to check
Check and record coolant level cold.
Inspect the bottle, cap area and nearby surfaces.
Ask how often coolant is added and why.
Record residue, fresh leakage and supporting repair records.
“I just filled it” leads to another question: where did it go?
Wild card: check the seller's claims
“But she's bulletproofed!”
What does that mean on this particular truck?
Ask what was changed, who did the work, which parts were used and how far the truck has travelled since. An invoice from years ago is useful history. It still needs to be considered alongside the truck's condition today.
Things to check
Ask for invoices with dates and odometer readings.
Record the shop and parts used.
Establish what “bulletproofed” actually includes.
Compare the paperwork with the behaviour and readings you've observed.
There isn't a magic distance at which every replacement part expires. The point is to understand the repair history and assess what's in front of you.

Honest Bob's name isn't a service record.
Decide whether it deserves a second look
A concern doesn't automatically rule a truck out. It gives you something to investigate and price before committing.
Write down what you know, what remains untested and what you need a shop to confirm. Allow for diagnosis as well as repairs when considering an offer.
These engine checks are one part of shopping. The rest of the vehicle 's body, frame, brakes, steering, transmission, driveline and paperwork still needs a proper inspection.
You might arrange that second look. You might negotiate after getting an estimate. You might walk away.
The fuel you spent getting there doesn't obligate you to buy it.
Don't pay healthy-truck prices for an unhealthy truck.
Follow along with Ursula
The earlier video covers why I'd consider a used Ford 6.0 in the first place. This one gives you the checks I'd bring to that first visit.
If you want to help support Ursula's future build, have a look at our Trusty Rusty shirts and the rest of The Baker Adventures merchandise.
What's one thing you always check before buying a used diesel—and what's the best “Honest Bob” explanation you've heard?




Comments